Are you tired of that annoying drip, drip, drip coming from your bath tap? A leaky tap not only wastes water but can also be a nuisance. Fortunately, fixing a leaky bath tap is a simple DIY task that you can easily tackle on your own. In this guide, we will walk you through the steps to fix a leaky bath tap in 5 easy steps.
Step 1: Gather Your Tools
Before you start, make sure you have all the necessary tools on hand. You will need an adjustable wrench, a flathead screwdriver, and replacement washers or O-rings. These can be found at your local hardware store.
Step 2: Turn Off the Water Supply
The first step in fixing a leaky bath tap is to turn off the water supply. Locate the shut-off valve for your bathroom and turn it clockwise to shut off the water flow. Next, open the tap to drain any remaining water in the pipes.
Step 3: Disassemble the Tap
Use the flathead screwdriver to remove the tap handle and any decorative caps covering the screws. Once the handle is off, use the adjustable wrench to loosen the packing nut and remove the stem. Inspect the stem for any damage and replace it if necessary.
Step 4: Replace Washers or O-Rings
Check the washers or O-rings inside the tap for wear and tear. If you notice any damage, carefully remove the old washers/O-rings and replace them with new ones. Make sure to match the new washers/O-rings to the old ones to ensure a proper fit.
Step 5: Reassemble the Tap
Once you have replaced the washers/O-rings, reassemble the tap in the reverse order of disassembly. Tighten the packing nut with the adjustable wrench, replace the tap handle, and turn on the water supply to test the tap for leaks. If the leak persists, repeat the steps or consult a professional plumber.
Fixing a leaky bath tap doesn’t have to be a daunting task. With these 5 easy steps, you can save yourself time and money by tackling the job yourself. Remember to gather your tools, turn off the water supply, disassemble the tap, replace washers or O-rings, and reassemble the tap. If you follow these steps carefully, you’ll have a leak-free bath tap in no time!
We hope this DIY guide has been helpful to you. Have you ever fixed a leaky tap before? Share your experiences in the comments below!